Introduction of oxygen special globe valve

Oxygen filters are used to remove impurities in corrosive media and protect the normal use of pumps, valves and other equipment. Generally, the water network is 20-60 mesh /cm2, the ventilation network is 40-100 mesh /cm2, and the oil network is 100-480 mesh /cm2. It can be configured according to the medium. Because the inner wall of the filter and the filter screen are made of tetrafluoroethylene with strong corrosion resistance, the product is widely used in various corrosive pipelines. Lined with rubber Y-type filter body cavity and filter screen all lined with fluorine plastic, the product in almost all strong acid and alkali and organic solvents and other media can be used evenly, the medium flow and valve opening is basically linear increase, can be used to control the flow of the valve.

Oxygen filter structure introduction:

The thermal insulation valve is welded with a layer of metal jacket in the valve body, through the injection of steam, thermal oil, cooling water, cold air, etc. into the metal jacket, so that the medium of the valve body in the normal temperature, heating, cooling and other conditions, to achieve the required temperature, to play the role of thermal insulation or cold. Thermal insulation valve is used at room temperature will solidify high viscosity, steam or other thermal insulation, cold media to ensure that the valve medium can work normally. The thermal insulation valve has good thermal insulation and cold protection characteristics, and the diameter of the valve is the same as the pipe diameter, and can effectively reduce the heat loss of the medium in the pipeline. It has good thermal insulation and cold protection characteristics, and can effectively reduce the heat loss of the medium in the pipeline. Thermal insulation valve in petroleum, chemical, metallurgy, pharmaceutical and other kinds of systems have been more used, effectively reduce the heat loss of the medium in the pipeline, to prevent the media crystallization, solidification and other similar appearance. The function of the thermal insulation valve is that when the temperature is high or low, the material in the thermal insulation valve has a thermal insulation effect on the medium, so that the medium will not condense or stick inside the valve body, so that the opening and closing of the valve can operate normally.

Insulation Y filter standard:

Gate Valve: Design and manufacture [GB12234]

Plug valve: Design and manufacture standard [GB/T 22130]

Globe valve: Design and manufacture standard [GB/T 12234]

Ball valve: Design and manufacture standard [GB/T12224, ASME B 16.34]