H41T cast iron lift check valve

H41T-10 cast iron lift check valve introduction: Check valve
is also known as check valve or check valve, its role is to prevent the backflow of the medium in the pipeline, generally suitable for clean media, should not be used for media containing solid particles and viscosity. Check valve has a variety of forms: including swing type, lift type, ball type, piston type and separation of circular spiral check valve, of which, fully open swing check valve is suitable for most non-wave situations, swing check valve is also used in the vertical pipeline (flow direction up), and then the valve has a stop block to prevent the valve flap from opening over the dead point.

Second, H41T-10 cast iron lift check valve installation:
1, do not make the check valve bear weight in the pipeline, the large check valve should be independently supported, so that it is not affected by the pressure produced by the pipe system.
2, pay attention to the direction of the flow of the medium should be consistent with the direction of the arrow of the valve body.
3, lift type vertical flap check valve should be installed on the vertical pipeline.
4, the lifting type horizontal flap check valve should be installed on the horizontal pipe.

Three, H41T-10 cast iron lifting check valve dimensions and connection dimensions: